Big Hurt (Gottlieb 1995)_Bigus(MOD)1.1 Wont accept coins to play. I can get to the game but wont accept any credits to start play.

[leuzier13]

Cant get the game to accept any coins to start the game no error messages just zero credits no matter what key I use to apply coins. any help please

 

[AnonTet]

I think sometimes you have to initialize de nvram and add a ball (see in the keys menu in vp what is the key for that)

then exit the table and vp and try to start the table again. Sometimes you just need to reset the table with f3 (after add the ball to the table)

 

[xenonph]

Or you can download this pre-initialised nvram package, that will allow for coins to be accepted on Bally 6803 and Gottlieb System 3 tables.

Bally - Gottlieb - Support File - Bally 6803 & Gottlieb GTS3 nvram pack

Pre-initialized NVRAM files for Bally 6803 (MPU A084-91786-AH06) and Gottlieb System 3 (GTS3) VPM tables that allow the games to accept coins. Copy all these files to the "nvram" folder of your VPinMAME installation. Note: these were formerly...

pinballnirvana.com

EDIT:
Here are buttons to press to initialise the nvram yourself...
Press 7
Left Flipper
Left Flipper
Left Flipper
Right Flipper
Player 1 Start
Player 1 Start
F3

 

[leuzier13]

Ive already done the bally 6803 and Gottlieb GTS3. I had already had those nvram packs but I re d/l it just in case with no luck ill try the 7.L F ,1,1,F3. hopefully that fixes it

 

[leuzier13]

Didn't do it neither did the add a ball

 

[xenonph]

Didn't do it neither did the add a ball

I just downloaded Bigus1's Big Hurt table.
Started table.
Hit 5 to insert coin, and it gave 2 credits.
Hit it again I it showed 4 credits.
This is from the nvram that was installed from the All-In-One VPX Installer.
(The same nvrams that are included in above package.)
Maybe try my nvram file. (Added as attachment)
There should be 4 credits on it.
Place content of zip file in your nvram folder.
These Gottlieb System 3 tables will not give credits without the pre-initialisation of the nvram.

EDIT:
Here are buttons to press to initialise the nvram yourself...
Press 7
Left Flipper
Left Flipper
Left Flipper
Right Flipper
Player 1 Start
Player 1 Start
F3

 

[leuzier13]

Once again you made it happen. Should put your attachment in with the table. It would be nice to actually d/l a table and have it work. Next on STTNG and also TSPP JP's tables, both of the games wire rails where the ball should drop out of the wire ramp. The ball gets stuck and the game goes into repeating alarm or something but the ball is always stuck where it should drop from the wire ramp.

 

[xenonph]

Once again you made it happen. Should put your attachment in with the table. It would be nice to actually d/l a table and have it work. Next on STTNG and also TSPP JP's tables, both of the games wire rails where the ball should drop out of the wire ramp. The ball gets stuck and the game goes into repeating alarm or something but the ball is always stuck where it should drop from the wire ramp.

Can you post links to these 2 tables you are referring to?
I can then check it out for you.