Pinball Nirvana Home Page

Go Back   Pinball Nirvana Forums > Visual Pinball and Visual PinMAME > Visual PinMAME New Releases

Visual PinMAME New Releases Announce Any New Visual PinMame Releases Here!

Reply
 
Thread Tools Display Modes
  #1  
Old 03-10-2009, 04:06 PM
Jamin7474 Jamin7474 is offline
Pinball Nudger
 

Join Date: Nov 2005
Posts: 44
Credits: 18,943.20
Thanks: 0
Thanked 66 Times in 12 Posts
Rep Power: 0
Jamin7474 will become famous soon enough
Default Hook (Jamin 1.0) What would the world be like...without Captain Hook?

My version of Hook is now in the download section. Some of the things left to work out (haven't played one in ages so hopefully gameplay isn't far off).

I remember that a ball was able to fall off the inner part of the left ramp on weak shots that only barely made the turn (which happened alot with those worn out data east flippers). I couldn't duplicate that with that part of the ramp with a physical wall of 0 so i put in a regular 2wire ramp. The way the ramp is set up it gains too much momentum and goes around 100% of the time. I may try and put in some speed triggers in and have it get kicked off if its going slow enough on parts.

Another thing is a ball going at the speed of sound will jump off that ramp and usualy get stuck somewhere. Have a speed control there but sometimes it gets through it only done it a few times in the hours of testing.

I'll need to play around a bit either with plunger setting or placement of skill shot 3 to make it slightly more accessible. I remember it was the hardest especially since it awarded extra ball. I've hit it occasionally but I think it needs a lil bit more tweaking. I usually end up in 2 then with a slight bit more plunger pull it falls off to the ramp or all the way around.

Also I wasn't sure what controlled the chaser lights...the video on youtube it seemed like it wasn't the gi solenoid cuz it acted seperate from that so I tied it into what the Left eye of the skull was doing.

Lemme know if anyone notices any other issues.

I really like the sounds of Data East roms on pinmame. They sure didn't sound that good on the real deals.

BANGARANG!!!
oh and
I HATE!!!!....Peter Pan...but remember...WINNERS DON'T USE DRUGS

Last edited by Jamin7474; 03-10-2009 at 04:18 PM.
Reply With Quote
The Following 6 Users Say Thank You to Jamin7474 For This Useful Post:
Hanson2 (03-11-2009), Kiaininja (03-11-2009), kristian (03-11-2009), Liteuser. (03-10-2009), mattstryker25 (04-05-2009), Silverball (03-10-2009)
  #2  
Old 03-11-2009, 07:45 PM
Torch32 Torch32 is offline
Inserted Coin
 

Join Date: Jun 2007
Posts: 4
Credits: 12,444.60
Thanks: 1
Thanked 0 Times in 0 Posts
Rep Power: 0
Torch32 is on a distinguished road
Default

Hey Jamin - I think Ifound a bug - on the skill shot - I got a ball stuck just above hole 3 and below the ramp - I tried tilting -the ball bounces but won't come out- the area where the ball is stuck is orange and just below the head decal- hope that helps
Reply With Quote
  #3  
Old 03-11-2009, 07:47 PM
Silverball Silverball is offline
Inserted Coin
 

Join Date: Jan 2009
Posts: 14
Credits: 11,084.30
Thanks: 20
Thanked 0 Times in 0 Posts
Rep Power: 0
Silverball is on a distinguished road
Default

Quote:
Originally Posted by Torch32 View Post
Hey Jamin - I think Ifound a bug - on the skill shot - I got a ball stuck just above hole 3 and below the ramp - I tried tilting -the ball bounces but won't come out- the area where the ball is stuck is orange and just below the head decal- hope that helps
Same here...
Reply With Quote
  #4  
Old 03-11-2009, 10:27 PM
Jamin7474 Jamin7474 is offline
Pinball Nudger
 

Join Date: Nov 2005
Posts: 44
Credits: 18,943.20
Thanks: 0
Thanked 66 Times in 12 Posts
Rep Power: 0
Jamin7474 will become famous soon enough
Default

wow trying to recreate that bug took a long time but i finally did it. I deleted Wall1...hopefully that gets rid of ball getting stuck.
It was one of the final adjustments I tried making before uploading it. I was trying to get it where it would stay on ssrampend2 wall and roll over onto the ramp but I guess I wasn't able to test it out after adding it in.

Anyway the deletion of Wall1 will be in any future update I may do.
Reply With Quote
The Following 3 Users Say Thank You to Jamin7474 For This Useful Post:
JonPurpleHaze (03-13-2009), Silverball (03-12-2009), Torch32 (03-11-2009)
  #5  
Old 03-12-2009, 11:53 PM
history1 history1 is offline
Inserted Coin
 

Join Date: Feb 2009
Posts: 4
Credits: 9,983.30
USA
Thanks: 1
Thanked 0 Times in 0 Posts
Rep Power: 0
history1 is on a distinguished road
Default

Hi Jamin! I love your photorealistic tables! I would like to point out one problem i've compared to videos of this pinball table. Everytime you launch a first ball the thing turns and the ball returns to the plunger. That should be easy to fix. Besides that when you launch it again it comes out fine.

Actually comparing to videos on the internet when a ball is launched it doesn't go down the right ramp. It shoots out and then strait down at the right side from the top. Hope this helps in making the table more like the real one.

Last edited by history1; 03-13-2009 at 12:10 AM.
Reply With Quote
  #6  
Old 03-21-2009, 06:31 PM
Ike Savage's Avatar
Ike Savage Ike Savage is offline
Pinball Porcupine
 

Join Date: Jun 2003
Posts: 1,620
Credits: 97,005.97
Peru US Ohio
Thanks: 238
Thanked 178 Times in 132 Posts
Rep Power: 28
Ike Savage has a spectacular aura aboutIke Savage has a spectacular aura aboutIke Savage has a spectacular aura about
Default

very late reply, but thanks for doing this table, jamin- really nice of you!

i had some excellent graphic links at one time but i had archived them at the original VPF and that's... no longer available now.
i have no idea where those pics are now unless mrhide has better ones.

reactions to your new table:

i know i'm an asshole for saying this but i hate the 'one size fits all' full decal system-
problems are that the table angle and POV can't be changed, and as for the reasons i mentioned that led to asking for a new version of hook, i can't change the backdrop or change light levels of the PF.

those were pretty-much the whole reason for asking for a remake.

back to a positive note, you did some awesome work on animations and fading lights.
and i like how you tried to find an angle that maximised PF view.
Reply With Quote
  #7  
Old 04-05-2009, 03:36 PM
mattstryker25's Avatar
mattstryker25 mattstryker25 is offline
Pinball Nudger
 

Join Date: May 2008
Posts: 80
Credits: 15,380.30
My Mood:
Thanks: 32
Thanked 2 Times in 2 Posts
Rep Power: 5
mattstryker25 is on a distinguished road
Default

Late reply too but another great table Jamin , Love all the red lights flashing on the tracks and the sounds are great as usual , I played it an hour ago and I had the same problem with the ball getting stuck still up the top of the skill shot lane, I was pressing all the nudges to try and unstick the ball but it tilted on me so I closed down
the game and restarted it and the ball was gone, just thought I'd let you know but it's only happened to me once and I've played it heaps of times now

As I always say , KEEP UP YOUR GREAT WORK
and THANKS ,

Matt
Reply With Quote
  #8  
Old 10-28-2009, 12:22 PM
subzero's Avatar
subzero subzero is offline
scottish bloke
 

Join Date: Oct 2004
Location: scotland
Posts: 82
Credits: 15,325.75
UK
My Mood:
Thanks: 1
Thanked 1 Time in 1 Post
Rep Power: 9
subzero is on a distinguished road
Send a message via ICQ to subzero Send a message via MSN to subzero
Default

Not blowing any trumpets but I still think the version I helped on (with Joep, El Condor, Destruk, Apocalypse, DataDragon, Pingod) is better
__________________
BANANAHAMMOCK!!
Reply With Quote
  #9  
Old 11-18-2009, 02:34 PM
subzero's Avatar
subzero subzero is offline
scottish bloke
 

Join Date: Oct 2004
Location: scotland
Posts: 82
Credits: 15,325.75
UK
My Mood:
Thanks: 1
Thanked 1 Time in 1 Post
Rep Power: 9
subzero is on a distinguished road
Send a message via ICQ to subzero Send a message via MSN to subzero
Default

Quote:
Originally Posted by D.clure View Post
I'd LIKE Banjo Tooie to be on Wii VC, but I think they said they wouldnt put it there cause Rares owned by Microsoft now and Banjo Tooies already on XBLA.
WTH has that got to do with hook???

Jamin, the more I play your table, the more I HATE my table, so ignore my above comment!!!
__________________
BANANAHAMMOCK!!
Reply With Quote
  #10  
Old 11-18-2009, 03:59 PM
TheMcD's Avatar
TheMcD TheMcD is offline
sXe And Better Than You
 
4 Highscores

Join Date: Jul 2008
Location: Albertshofen, Bavaria
Posts: 332
Credits: 21,636.90
Germany DE Bavaria
My Mood:
Thanks: 17
Thanked 42 Times in 37 Posts
Rep Power: 8
TheMcD will become famous soon enough
Default

Yay for senseless spambots.

The McD
__________________
PN's resident pinball music fanatic. Also a nutcase.

Click HERE to visit TheMcD's Pinball Music Emporium!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
data east hook Cranerock Maintenance & Repair 1 02-17-2013 10:48 AM
Hook Pinball Cranerock Sales, Swaps & Needs 0 12-25-2012 08:56 PM
hook pinball wont turn on glyndawn Maintenance & Repair 6 09-04-2012 04:29 PM
hook pinball help glyndawn Maintenance & Repair 3 08-24-2011 02:42 AM
92 hook data east or t2 judgement day ttrinidad General Pinball 1 02-12-2008 03:52 PM


All times are GMT -4. The time now is 08:24 PM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.
Template-Modifications by TMS
vBCredits v1.4 Copyright ©2007 - 2008, PixelFX Studios