|
|
|
|||||||
| Maintenance & Repair Discuss and offer tips on real life machines. |
 |
|
|
Thread Tools | Display Modes |
|
#1
07-08-2012, 06:44 AM
|
|||
|
|||
Police Force Williams 11b
Hi Guys,
Pinball doesn t boot. No fuses or big transistors are blown. PSU seems fine, the +5V does lit up but not the other 2 status leds. 3x1.5V voltage seems fine.... Nothing is displayed on the front and strange sounds are emitted when powering on. Sometimes continous beeps, sometimes nothing.... ideas? Thanks, Vincent 
|
|
#2
07-24-2012, 12:43 AM
|
||||
|
||||
|
Disconnect all connectors from the MPU board except 1j17. Check for +/- 12 volt. if 12 volt is missing it will not but. It could also be another board that is causing the issue. If it tries to boot with just 1j17 connected, start plugging in boards one by one until you find the one keeping it from booting. If all else fails, I have a system 11a F-14 Tomcat that I can diagnose your board in if you want to ship it to me. I can provide a reference. With the strange sound issues you are describing, I am thinking that your sound board is causing your problems.
|
|
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| police force pinball machine | kurtackerman | Maintenance & Repair | 1 | 10-09-2012 10:30 PM |
| Williams Police Force lower display dead | yosemitemtb | Maintenance & Repair | 7 | 09-08-2012 06:40 PM |
| Strange display problem on Williams System 11b (Taxi)… | pb1592 | Maintenance & Repair | 0 | 12-07-2011 11:56 AM |
| Police Force 1.2 - JP | jpsalas | Visual PinMAME New Releases | 3 | 09-16-2006 01:22 PM |
| Police Force (Williams 1989) | jpsalas | Visual PinMAME New Releases | 4 | 04-10-2006 03:38 PM |
Linear Mode
