![]() |
|
Maintenance & Repair Discuss and offer tips on real life machines. |
![]() |
|
Thread Tools | Search this Thread |
#1
|
||||
|
||||
![]()
Hi. I have a problem with a DMD from my Rocky and Bullwinkle. When turning on the machine, I can see the version of the machine on the display and then nothing. The game starts and everything else works perfectly, but the display does not turn on again until I turn off the machine and turn it on again. I can see only the version of the display. Any help is welcome. I understand that the voltages are fine and the DMD is fine because it lights up perfectly during the boot of the display.
|
#2
|
||||
|
||||
![]()
What does the dmd show during the self test modes?
|
The Following User Says Thank You to pinballdaveh For This Useful Post: | ||
Ike Savage (11-16-2018) |
#4
|
||||
|
||||
![]()
Other than changing the ribbon cable from the cpu to the dmd driver board, which i doubt is the problem, remove the the dmd and dmd driver board and send them away to be tested.
|
![]() |
Bookmarks |
Thread Tools | Search this Thread |
|
|