View Single Post
  #13  
Old 05-11-2012, 11:54 PM
zero_koop's Avatar
zero_koop zero_koop is offline
Pinball Nudger
 

Join Date: May 2012
Posts: 11
Credits: 0.00
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 0
zero_koop is on a distinguished road
Default

I have solved the broken flipper problem!!!! The trace behind the node that I was talking about had become burnt out. So I just soldered a new wire in its place and bingo, back in business! Using some continuity tests I figured out the problem had to be somewhere along the traces, so I removed the board and it took about 2 seconds to identify the problem. It was completely burnt out in one spot. Thanks for your help!
Reply With Quote