View Single Post
  #2  
Old 08-30-2012, 08:34 PM
pinballdaveh's Avatar
pinballdaveh pinballdaveh is offline
Pinball Technician
 

Join Date: Aug 2012
Location: poconos
Posts: 989
Credits: 0.00
Thanks: 229
Thanked 361 Times in 304 Posts
Rep Power: 20
pinballdaveh is just really nicepinballdaveh is just really nicepinballdaveh is just really nicepinballdaveh is just really nice
Default

each of the 4 pop bumpers is controled by a pop bumper board. when you lift up the playfield they will near the top.to find out which one you need to look at check the wire colors on the pop bumber coil prob. a single wire and find that wire on the connector of the pop bumper board. turn game off and unplug connector from board. unscrew board and check for cracked solder connections usually on the male pins or transistor.resolder if needed. also check for loose wires on the connector. replace board if still faulty
Reply With Quote
The Following User Says Thank You to pinballdaveh For This Useful Post:
spalmer (09-01-2012)