Pinball Nirvana Forums

Pinball Nirvana Forums (https://pinballnirvana.com/forums/index.php)
-   The Playfield (https://pinballnirvana.com/forums/forumdisplay.php?f=105)
-   -   Pinscape controller and plunger (https://pinballnirvana.com/forums/showthread.php?t=14283)

zinzin112 09-28-2019 03:16 AM

Pinscape controller and plunger
 
I have had a Virtuapin plunger kit V2 for some time. It has worked fairly well, but recently has given me issues. Im considering going a different route for a plunger and controller board, so I am wondering if MJRs Pinscape board and plunger are still in a build-your-own state or if I can buy his controller board and plunger that will work similar to the Virtuapin kit.

If so, can I use my existing button wiring from the Virtuapin kit or would I need to wire the buttons from scratch to the Pinscape board?

Thanks!


All times are GMT -4. The time now is 01:44 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Credits System provided by vBCredits II Deluxe (Lite) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Shoutbox provided by vBShout v6.2.15 (Lite) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.