|
|
| Time |
User |
Message |
 08-14, 21:00
|
|
|
Jurassic Park says "Quick reset the system" everything works except the display for the game. The display has power and shows the copyright info but that is it. How do I 'reset the system?' I have tried turning it off and unplugging it....
|
|
|
08-06, 00:41
|
|
|
|
08-05, 18:02
|
|
|
|
08-05, 14:22
|
|
|
just got my first pin and the chute on the left has a wire that sticks and holds the ball from exiting. How do I fix that?
|
|
|
08-04, 19:47
|
|
|
how do I ask for help fixing my pinball?
|
|
|
07-14, 10:30
|
|
|
Anyone have info on why I only get the DMD when I try to play a table? I get the sound and all the button function, I just can't see the playfield.
|
|
|
07-09, 15:37
|
|
|
Just download VPinball8.1 .EXE ONLY. As long as you have a full install of Visual Pinball, the .exe only should run with no problems.
|
|
|
07-09, 15:36
|
|
|
Balls getting stuck? Tables with that problem were designed using Visual Pinball ver. 8 "VPinball8.1.exe" On ver. 8.1 there should be no problem.
|
|
|
07-08, 21:41
|
|
|
no matter what table you play
|
|
|
07-08, 21:41
|
|
|
Hey all, has anyone had a problem with balls getting stuck in chutes and tunnels constantly
|
|
|
07-03, 16:02
|
|
|
help wiring problem with gottlieb sure shot where di i go??
|
|
|
06-12, 22:36
|
|
|
|
06-09, 12:36
|
|
Hi Killerkop. Good to see new people joining in. 
|
|
|
06-09, 11:58
|
|
|
|
06-02, 10:54
|
|
|
i just break my own record! more than 7 milj on F14-tomcat by Williams
|
|
|
05-30, 12:28
|
|
|
Hello all, my Bally space invaders m/c won't let me start a new game, self test came up with no faults, any ideas?
|
|
|
05-02, 04:51
|
|
|
Start the table and press the F6 key for any additional dipswitch game settings, but not all table simulations include these extra settings.
|
|
|
05-02, 04:49
|
|
|
|
04-27, 13:55
|
|
|
Hi I installed visual pinball but tables dont work normally no special no extra ball no replay with scores can any one help me thanks
|
|
|
04-27, 13:30
|
|
|
bonjour j'ai installé visual pinball pack mais les tables ne fonctionnent pas comme dans la réalité (pas d'extra ball pas de replay avec les points pas de special) si quelqu'un peut m'aider merci
|
|
|
04-27, 13:27
|
|
|
|
04-12, 12:50
|
|
|
|
04-12, 03:14
|
|
|
|
04-12, 03:13
|
|
|
Simply logging in to the forums gain credits for you, almost anything you do gains credits.
|
|
|
04-12, 00:57
|
|
|
how do u get credits for the casino?
|
|
|
03-15, 12:02
|
|
|
You need to download and UNZIP the .vbs files to the Visual Pinball\Tables folder.
|
|
|
03-12, 11:29
|
|
|
I can't load any tables. Get Unable to open S11.VBS. Can anyone help?
|
|
|
03-12, 11:28
|
|
|
I can't open any tables. Get unable to open S11.VBS ??
|
|
|
02-27, 20:31
|
|
|
Go to www.ipdb.org and look up Captain Fantastic and check the schematic or the manual for the fuses.
|
|
|
02-27, 14:52
|
|
|
Hi, I am new this forum. We have a Capt. Fantastic pinball game. Does anyone have a picture of the area where the fuses are and where the wires are soldered? Jody
|
|
|
02-25, 23:33
|
|
|
Well, I found the help and support forums, so I'll try there. Isn't it amzining what you can find when you scroll past what looks like a nice, neat end-of-screen?
|
|
|
02-25, 23:30
|
|
|
Looks like some files got currupted and Visual Pinball, PinballMAME, or whatever isn't working anymore. Is there a set of instructions on installing otehr than the "How to" I have from 2008?
|
|
|
02-21, 17:56
|
|
|
got a 77 bronco 4 players work all the time . does it work that way or is ther a setting that i have missed. anyone got a clue. thanks panhandle
|
|
|
02-17, 06:36
|
|
|
You don't like the game? Or you're having trouble getting it to work?
|
|
|
02-14, 12:51
|
|
|
|
01-22, 04:32
|
|
|
For all tables, usually, press the 5 key for credits and the 1 key to play. For VPinMame tables the first time, Start the table and press the top 7 key. If nothing happens press the F3 key to reset to play mode, then press the 5 key for cred
|
|
|
01-22, 04:30
|
|
|
Keep the ROM.ZIP file ZIPPED!
|
|
|
01-22, 04:30
|
|
|
Download and install the Visual Install Program from the Pinball Nirvana front page. Then download and unzip a table.VPT file to the C:\Pinball\Tables folder and if it's a VPinMame table you need to download the specific ROM.ZIP file to the Roms folder.
|
|
|
01-21, 21:56
|
|
|
how do you download pinball tables
|
|
|
01-13, 10:07
|
|
|
I'm trying too play Medieval Madness (sorry for double post i pressed enter by accident)
|
|
|
01-13, 10:06
|
|
|
Can any1 help me, i'm new to the rom/vpt and pinball on the pc. I really don't know what to do, i tried alot but nothing seeme to work when i used it >.>
|
|
|
01-03, 20:37
|
|
|
Is the tilt mechanism loose?
|
|
|
01-02, 22:04
|
|
|
Hi, I have a xenon pinball and it occasionally tilts for no reason when the ball drains back to the kicker. This only occurs when two balls are in the kicker. If one is trapped on the playfield, it doesn't happen. Any have any ideas how to fix?
|
|
|
12-29, 21:16
|
|
|
I have a 1971 Gottleib extra inning baseball pinball machine and trying to determine how to raise the runs scored needed to get an extra inning(free ball). It is set at 11 runs and I would like to raise it to a higher number. thanks
|
|
|
12-29, 20:43
|
|
|
looking for a little help with Extra inning machine
|
|
|
12-01, 14:51
|
|
|
@India bluebelle: I have one too, and there are connectors beneath the playfield that can be swapped. If you play around with those you should be able to fix it. Good luck!
|
|
|
12-01, 06:33
|
|
|
Hey G'day I have a St fighter 2 champ edition pinball machine, which has been serviced and re built, however, car crunch is now scoring whem ball goes in topedo and vis versa? Scoring starts without ball being shot!!! Any ideas of a fix please? Thanks. In
|
|
|
12-01, 06:20
|
|
|
|
11-29, 11:38
|
|
|
Click the "Donate" link found in a thread reply or go to the Member's Profile page, click "Statistics" and then click "Donate" toward the bottom of the page.
|
|
|
11-28, 16:54
|
|
|
|
11-27, 21:27
|
|
|
Heyas all pinballers... good evening
|
|
|
11-25, 14:30
|
|
|
Gobble Gobble
|
|
|
11-24, 13:23
|
|
|
Last night of work for the week! YEEEEEEHAW!!!!!!
|
|
|
11-23, 22:24
|
|
|
|
11-23, 22:24
|
|
|
|
11-21, 23:35
|
|
|
Lunacy is next to Godliness
|
|
|
11-21, 04:49
|
|
|
One of the Hollywood folk who's been badgering me is a Liz Taylor-type. She's a Drag. She acts like she thinks men owe her a Liver.
|
|
|
11-21, 04:26
|
|
|
Even if she's bloody and evil?
|
|
|
11-21, 04:21
|
|
|
Personally, I'd rather have a nightmare about something bloody or evil; not a woman in drag!
|
|
|
11-21, 03:06
|
|
|
Nightmares, yeah. It works for me!
|
|
|
11-21, 02:18
|
|
|
Thanks Sleepy, that's gonna give me nightmares for a week!
|
|
|
11-21, 02:15
|
|
|
Never live for The Man, even if she's a Woman in Drag!
|
|
|
11-20, 20:59
|
|
|
Gotcha Steve. I know how u feel! Only 3 10 hour days 4 me next week!!!
|
|
|
11-20, 05:31
|
|
3 day weekends, nice, still I'll take my 5 half days a week, for what it's worth, not much still I rather not live for the man. 
|
|
|
11-19, 01:07
|
|
|
PHEW! Monday through Thursday is done! Time for the WEEKEND!!!! 3 Days!!!!
|
|
|
11-19, 01:07
|
|
|
|
11-11, 03:36
|
|
|
That's Teenage Mutant Ninja Turtles!
|
|
|
11-11, 03:15
|
|
|
|
11-11, 02:31
|
|
|
|
11-11, 02:31
|
|
|
|
11-10, 12:57
|
|
|
When can I sleep? 3 pm...time for work.
|
|
|
11-09, 23:26
|
|
|
The condition of your condition is conditional
|
|
|
11-09, 21:24
|
|
|
I just dropped in to see what condition my condition was in.
|
|
|
09-26, 09:48
|
|
|
|
09-26, 02:42
|
|
|
vbs files extract to the Visual Pinball (or Pinball)\Tables folder. I don't know what the vpc files are, but if they come with the .vpt.zip download, then try putting them in the Tables folder also.
|
|
|
09-25, 19:46
|
|
|
where does vbs and vpc files extract to?
|
|
|
09-25, 19:46
|
|
|
|
09-25, 01:29
|
|
|
Find the VPinMame Setup.exe on your hard drive and click it to open, then click Install.
|
|
|
09-23, 21:13
|
|
|
when loading some tables of visual pinball i cannot open them.. i get "unable to load vpinmame activex cannot create" any ideas
|
|
|
09-19, 01:59
|
|
|
Install the program from the link. Then download and UNZIP the .vpt file to the Tables folder and download the Dr. Dude ROM file to the Roms folder. Keep the ROM.zip file ZIPPED.
|
|
|
09-19, 01:57
|
|
|
|
09-18, 15:19
|
|
|
How fix Dr dude with pinmame ? thank !
|
|
|
09-18, 15:19
|
|
|
I have trouble with one VPT and Pinmame:
|
|
|
09-18, 15:18
|
|
|
|
09-02, 19:58
|
|
|
Do you have Future Pinball installed? .fpt files are for Future Pinball.exe. .vpt files are for Visual Pinball.
|
|
|
09-02, 14:46
|
|
|
AFTER D/L table main game comes up .fpt file and i can not open these. any idea? thanks
|
|
|
08-23, 18:14
|
|
|
|
06-22, 11:46
|
|
|
Does anyone know why I can not download tables right now? I logged in yesterday for the first time in awhile and nothing?
|
|
|
06-16, 00:43
|
|
I'm gonna predict the game will end in a tie! Oh, does this record the date? Dammit! 
|
|
|
06-11, 20:44
|
|
|
Go England or USA in the World Cup tomorrow?
|
|
|
05-18, 20:22
|
|
|
|
05-14, 04:33
|
|
|
Anyone here from The Australian Teen Yacht Club?
|
|
|
04-27, 16:18
|
|
|
You don't have to cop to it.
|
|
|
04-27, 16:17
|
|
|
|
04-26, 13:38
|
|
|
Any alumni here from Poly High or points beyond?
|
|
|
04-26, 13:37
|
|
|
CharlieFSA If you click New Thread it should work for posting, though I don't know. There might be something else preventing posting like browser settings, etc.
|
|
|
04-26, 13:35
|
|
|
|
04-26, 13:35
|
|
|
|
04-25, 05:10
|
|
|
can enyone help i can run Medieval_Mad and pls help i cant post nothing on forum for me forum is buged
|
|
|
04-22, 04:58
|
|
|
